Sailing Master Offshore Near Coastal
Take your sailing command plans beyond inshore waters. Sailing Master Offshore Near Coastal combines an accepted yachtmaster qualification with machinery competence, first aid, radio and medical evidence. AMSA’s certificate covers sailing vessels under 24 m inside the Australian EEZ.
Australia · Australian Maritime Safety Authority (AMSA)
You can prepare independently for the RYA Yachtmaster practical exam once you meet its experience and certificate conditions. RYA preparatory courses are optional. Approved ancillary training and the accepted qualification remain required for the AMSA application. The IYT alternative follows its recognised training and assessment pathway. IALACOLREG offers theory and exam preparation only. It provides no certified or approved course. Use this material as revision alongside your recognised training and practical preparation.
AMSA official certificate requirements ·
Who can apply
Be at least 16 when AMSA issues the certificate and be able to speak, read and understand English Meet AMSA’s medical and eyesight requirements using form 1850, or a current AMSA form 303 medical Hold current HLTAID011 Provide First Aid or an accepted equivalent Hold LROCP or higher for marine radio For the RYA Offshore route, the practical exam has a minimum age of 18
Theory revision alongside recognised training
Practise supporting knowledge
Practice questions (with answers)
In IALA Region A, the port-hand mark colour is:
Show answer
Correct answer: B. Red, usually can-shaped
Region A: port-hand red, starboard-hand green. Region B: port-hand green, starboard-hand red. Interpret both in the charted conventional direction of buoyage.
Except where Rules 9, 10 or 13 otherwise require, a power-driven vessel underway shall keep out of the way of all these EXCEPT:
Show answer
Correct answer: C. Another power-driven vessel of larger size
Rule 18(a): power-driven vessels give way to NUC, RAM, fishing, and sailing vessels — but size alone does not determine priority.
In restricted visibility, your vessel detects another by radar alone forward of the beam and needs to alter course to avoid collision. The target is not being overtaken. So far as possible, avoid:
Show answer
Correct answer: C. Alter course to port
Rule 19(d)(i): when course alteration is chosen for a radar-only contact, avoid a port alteration for a vessel forward of the beam, other than a vessel being overtaken.
Unless risk of collision has been determined not to exist, on hearing a fog signal apparently forward of the beam a vessel shall:
Show answer
Correct answer: C. Reduce speed to the minimum to maintain course
Rule 19(e): unless risk of collision has been determined not to exist, reduce to the minimum speed for keeping course, take all way off if necessary, and navigate with extreme caution until danger of collision is over.
The second masthead light on a power-driven vessel must be:
Show answer
Correct answer: C. Abaft of and higher than the forward one
Rule 23(a)(ii): the second masthead light must be abaft of and higher than the forward one.
The topmark of a West Cardinal mark is:
Show answer
Correct answer: C. Two cones point to point
Two separate black cones with their points facing each other. The cones must remain clearly separated.
You are entering a river where the chart shows the conventional direction of buoyage is upstream from the sea entrance. What should determine whether a lateral mark is port-hand or starboard-hand?
Show answer
Correct answer: C. The charted conventional direction of buoyage
Lateral marks are interpreted in the conventional direction of buoyage. The chart, not guesswork, determines which side is port-hand and which is starboard-hand.
You sight a cardinal mark with both cones pointing down and a light showing six quick flashes followed by one long flash. What is the safe action?
Show answer
Correct answer: C. Pass south of the mark
Two cones down and the 6+1 light rhythm identify a South Cardinal mark, meaning the safe water lies to the south of the mark.
How to obtain the certificate
Obtain the accepted RYA or IYT qualification, satisfy the machinery and supporting-certificate requirements, then apply to AMSA.
