Decide
Four situations at sea. Decide first, then read why.
Your A3 ship is sinking. The nearest ship is 20 miles away. Is the satellite distress alert enough to alert her?
Key points
- How the satellite route worksSES → satellite → coast earth station → RCC.
- Recognized services: Inmarsat and Iridium.
- Coverage differs, so A3 differs by service.
- A terminal ready to workLogged in, current position, audible alarm, tested by protocol.
- Never test with a real alert.
- Update registration after a change of name or flag.
- Distress by satelliteAlert, then a distress-priority message with details; cancel a false alert through the same earth station.
- Acknowledgement comes back through the satellite.
- Alert nearby ships by DSC too.
Check what you have read
What is the ship earth station (SES)?
Worked case: Holed in mid-Atlantic
Eleven in the morning, 28° W, sea area A3. A collision has holed the ship and the master orders a distress alert. You have a satellite terminal and MF/HF DSC. A ship 50 miles away keeps an MF DSC watch.
Before you read the solution: what would you do?
True or false?
Decide each statement before you see the answer.
SOLAS names Inmarsat as the GMDSS satellite provider.
SES → satellite → coast earth station → RCC.
Testing the distress button with a real alert is fine if you cancel it quickly.
Logged in, current position, audible alarm, tested by protocol.
Switching the terminal off cancels a false alert.
Alert, then a distress-priority message with details; cancel a false alert through the same earth station.
Satellite urgency messages need a DSC announcement first.
A satellite distress alert also alerts the ships around you.
Exercise: Get the satellite route right
You are the GOC holder on an A3 ship with one satellite terminal and MF/HF.
Step by step
Put the route of a satellite distress alert in order.
- 1Rescue coordination centre
- 2Satellite
- 3Ship earth station
- 4Coast earth station
Before departure the terminal shows 'not logged in'. What do you do?
Which equipment alerts the ship 50 miles away fastest?
Now on your own
A cadet pressed the satellite distress button by mistake during cleaning.
How do you cancel it?
What must the cancellation contain?
After cancelling, what do you do?
Check: 10 questions
Questions from this subject, explained after each answer.
Free: lesson + 10 questions · Exam Pass: all 26 questions, unlimited practice tests, your mistakes retrained
The full explanation and the lessons for each programme item
Topic 1 of 4
Three parts: space, ground and ship
A satellite alert travels ship → satellite → shore station → RCC. The space segment is the satellites and their coverage.
The ground segment is the land or coast earth stations (CES) and the network coordination stations (NCS). On board is your ship earth station (SES) (CEPT GOC A2 2.1).
Since 2024 SOLAS no longer names a provider: it speaks of a 'recognized mobile satellite service', recognized by IMO for GMDSS use (IV/2.1.13). Inmarsat and Iridium are recognized; IMSO oversees them. Their coverage areas differ, which is why sea area A3 now depends on the service your terminal uses.
An A3 ship's terminal must handle distress, urgency and safety communications, distress-priority calls and a watch for shore-to-ship distress alert relays, including area calls (IV/10).
- Every coast earth station that receives a distress alert routes it to an RCC as soon as possible and relays the RCC's acknowledgement (47 CFR 80.1119(b)).
- A satellite distress alert is acknowledged immediately, through the satellite (80.1117(b)).
Topic 2 of 4
Using the terminal
A terminal that is not logged in, or has a stale position, cannot do its job. Check before you sail that it is registered or logged in to the network, that it shows the current position and time, and that its alarms are audible on the bridge.
To send a distress alert, use the dedicated distress button or the distress function. If time allows, set the nature of distress and check the position first. Then follow up with a distress-priority call or message to the RCC with the details: who you are, where you are, what happened, what help you need, how many people (CEPT GOC C2 2.1).
Urgency and safety go the same way with their own priority. Through the satellite service a separate DSC announcement is not needed (47 CFR 80.1131(a), 80.1133(a)).
- Test the terminal with the testing protocol the service provides, never with a real distress alert (CEPT GOC B4 4.1; MSC.514(105)).
- An A3 ship also has MF DSC: use it to alert ships nearby, because a satellite alert goes to the shore, not to the ship 20 miles away.
Topic 3 of 4
Cancelling a false satellite alert
Tell the RCC straight away, by the same route the alert took. Send a distress-priority message through the same land or coast earth station, giving your ship's name, call sign or registration and satellite identity, and saying that the alert is cancelled (47 CFR 80.335(d)).
IMO asks ships that have sent a false alert to make every reasonable attempt to reach the RCC by any means to cancel it (MSC.514(105)). Then log what happened and why.
- Keep the terminal logged in and watched afterwards: the RCC may call you back to confirm.
- Report the cause so the company can stop it happening again.
Topic 4 of 4
Practise and go further
The best places to practise this subject. When you finish, one tap brings you back to the course.
Sources
- IMO resolution MSC.496(105): SOLAS chapter IV in force from 1 January 2024 (Hong Kong Marine Department copy) · checked
- IMSO report on GMDSS mobile satellite service providers (2020) · checked
- US 47 CFR Part 80 subpart W: GMDSS operating procedures for distress, urgency and safety (the ITU procedures in US law) · checked
- US 47 CFR 80.335: procedures for cancelling false distress alerts · checked
- IMO resolution MSC.514(105): guidelines for the avoidance of false distress alerts · checked
- CEPT ERC Decision (99)01: harmonised examination syllabi for the GOC and ROC (amended 8 March 2024) · checked
Checked against SOLAS, IMO, CEPT and ITU-based sources on .

