- Under 12 mcommand length limitMarine Order 505, Schedule 1
- Inshore watersoperating areaMarine Order 505, Schedule 1
- 16 yearsminimum AMSA issue ageAMSA eligibility
- RTO + AMPAqualification routeAMSA new-certificate requirements
YOUR NEXT COMMANDWhat this certificate is for
AMSA issues this domestic certificate for professional small-vessel work. It combines command and machinery duties, with inshore operations and designated-water provisions. Use the vessel’s intended work and engine installation to decide whether Grade 1 fits your plans.
AT THE HELMThe vessels and work it covers
Command and operate the engines of commercial vessels under 12 m in inshore waters, or waters designated by a state or territory for this certificate subject to its conditions. Inboard propulsion must be under 500 kW. Outboard propulsion has no power limit. Tender duties extend within 3 nautical miles of a parent vessel inside the Australian EEZ.
Duties you can undertake
- Command within the certificate’s vessel, engine and area limits, including passenger operations subject to the vessel’s authorisation
- Act as chief mate or deck watchkeeper on vessels under 24 m in inshore waters
- Perform General Purpose Hand, Coxswain Grade 3 and Grade 2 duties
Certificate limits
- Vessel length must be under 12 m for command
- Inboard propulsion must be under 500 kW
- State or territory conditions apply in designated waters
BEFORE YOU STARTBuild your application checklist
Eligibility and supporting certificates
- Be at least 16 when AMSA issues the certificate and be able to speak, read and understand English
- Meet AMSA’s medical and eyesight requirements using form 1850, or a current AMSA form 303 medical
- Hold current HLTAID011 Provide First Aid or an accepted equivalent
- Hold SROCP or higher for marine radio
- AMSA restricts holders with colour-deficient vision to duties in daylight hours
Qualification and sea service
- Certificate II in Maritime Operations (Coxswain Grade 1 Near Coastal) through an RTO
- With a completed AMSA-approved task book, at least 30 qualifying days on commercial vessels at least 5 m long, working in a deck capacity or a combined deck-and-engineering capacity.
- Without the task book, at least 150 qualifying days on commercial or recreational vessels at least 5 m long in a deck, or deck-and-engineering, capacity
Keep evidence of qualifying service using AMSA form 771, the onboard record in your task book, an accepted logbook or a letter from the operator, owner, master or chief engineer. Agree the task-book route with your RTO early.
PAPERWORKApply through AMSA
- Choose the recognised pathway
Find an RTO that offers the qualification and its AMPA. Confirm both are available before enrolling.
- Gather your evidence
Collect your medical, first aid, qualifying certificates, photograph and sea-service record, AMPA cover page and radio evidence where required.
- Lodge the application
Apply in myAMSA using Australian Government myID and upload the documents. If you cannot use myAMSA, take form 426, supporting copies and identity evidence to a participating Australia Post outlet.
AMSA’s new-certificate application fee is AUD 192 in the 2026–27 schedule effective from 1 July 2026. Check the official fee table when lodging.
ASSESSMENTHow competence is assessed
| Part | What to expect |
|---|---|
| Qualification | Complete the Certificate II with a registered training organisation |
| Final assessment | Pass the AMSA Mandated Practical Assessment (AMPA) with an RTO |
| Syllabus | Shipboard safety, environmental practices, engineering, seamanship, manoeuvring, regulations, navigation and navigational emergencies |
| Applied navigation | The syllabus calls for chartwork, bearings, tide-table use, weather interpretation and application of collision regulations |
YOUR STUDY PLANPrepare one practical decision at a time
- Start with the official programme
Turn the applicable syllabus and competence standards into a revision checklist. Ask your training provider to identify the evidence still needed.
- Practise explaining your choices
Rehearse a departure, a developing collision risk and an emergency. Explain the information you need and the action you would take, then review it with your instructor.
- Connect revision to the boat
Use IALACOLREG to revise collision regulations, buoyage, lights and signals where relevant to your programme. Practise the complete syllabus and required boat handling with your recognised provider.
THE QUALIFICATION PATHHow it fits with other certificates
| Certificate | Relationship |
|---|---|
| Coxswain Grade 2 | Under 12 m, with a smaller standard inboard-engine limit and a different operating area |
| Coxswain Grade 1 | Adds inshore command and under-500-kW inboard machinery duties |
| Master less than 24 m | A separate Certificate III and sea-service pathway for larger command duties |
A ferry-in-chains endorsement requires at least 20 qualifying days on a ferry in chains. Include that evidence when applying for the endorsement.
Does this fit your next role?
A good fit when
- Your planned vessel and operating area fit the certificate
- You can document the experience and complete the recognised qualification
Plan for these requirements
- Medical, first aid and any required radio certificates
- Recognised training and assessment, plus the AMSA application
Start with the intended job, check the certificate limits, and take your existing records to the recognised provider. Build your theory revision alongside the practical pathway.
Theory revision alongside recognised training
Practise supporting knowledge
Practice questions (with answers)
Where it is impracticable for a seaplane or WIG craft to show the lights and shapes prescribed in Part C, she must:
Show answer
Correct answer: B. Exhibit lights and shapes as closely similar as possible in characteristics and position to those prescribed
Rule 31: where compliance is impracticable, seaplanes and WIG craft shall exhibit lights and shapes as closely similar in characteristics and position as possible.
A 'short blast' is defined as a blast of about:
Show answer
Correct answer: B. One second
Rule 32(b): a short blast means a blast of about one second's duration.
A vessel of 100 metres or more must carry:
Show answer
Correct answer: C. A whistle, bell, and gong
Rule 33: vessels 100m+ must have a whistle, bell, AND gong.
Signals to attract attention must:
Show answer
Correct answer: B. Not be mistaken for any prescribed signal or aid to navigation
Rule 36: signals to attract attention must not be mistaken for any other prescribed signal or navigation aid.
Safe water marks have:
Show answer
Correct answer: A. Red and white vertical stripes
Safe water marks are red and white vertical stripes, indicating navigable water all around.
Special marks are coloured:
Show answer
Correct answer: C. Yellow
Special marks are yellow, indicating special areas like military zones, cables, or pipelines.
How does IALA Region B differ from Region A?
Show answer
Correct answer: B. The colours are reversed — red to starboard
Region A: port-hand red, starboard-hand green. Region B: port-hand green, starboard-hand red. Interpret both in the charted conventional direction of buoyage.
An East Cardinal mark shows how many quick flashes?
Show answer
Correct answer: B. 3 flashes
White lights, when fitted: North Q or VQ; East VQ(3) 5 s or Q(3) 10 s; South VQ(6)+LFl 10 s or Q(6)+LFl 15 s; West VQ(9) 10 s or Q(9) 15 s. The long flash lasts at least 2 s.
The full guide
Ready to take charge of a small commercial vessel? Coxswain Grade 1 Near Coastal combines command and engine operation under 12 m with a wider operating area than Grade 2. Your route brings together an RTO qualification, recorded sea service and a practical assessment.
This title requires the relevant qualification through a registered training organisation and an AMPA. You must complete that approved qualification and assessment route to obtain the title. Arrange training and any recognition of prior learning directly with the RTO. IALACOLREG offers theory and exam preparation only. It provides no certified or approved course. Our material is revision alongside the approved RTO course.
Who can apply
Be at least 16 when AMSA issues the certificate and be able to speak, read and understand English Meet AMSA’s medical and eyesight requirements using form 1850, or a current AMSA form 303 medical Hold current HLTAID011 Provide First Aid or an accepted equivalent Hold SROCP or higher for marine radio
How to obtain the certificate
Complete Certificate II in Maritime Operations (Coxswain Grade 1 Near Coastal) and the AMPA with an RTO, then submit your service and supporting documents to AMSA.
Common questions
- Can I prepare independently?
- This title requires the relevant qualification through a registered training organisation and an AMPA. You must complete that approved qualification and assessment route to obtain the title. Arrange training and any recognition of prior learning directly with the RTO. IALACOLREG offers theory and exam preparation only. It provides no certified or approved course. Our material is revision alongside the approved RTO course.
- What does this certificate allow?
- Command and operate the engines of commercial vessels under 12 m in inshore waters, or waters designated by a state or territory for this certificate subject to its conditions. Inboard propulsion must be under 500 kW. Outboard propulsion has no power limit. Tender duties extend within 3 nautical miles of a parent vessel inside the Australian EEZ.
- Where do I apply?
- Use myAMSA, or lodge form 426 with supporting documents at a participating Australia Post outlet.
Other exams
Reviewed by Ramon Curto, Nautical teacher at IECNPC · Last reviewed:
