- Under 12 mcommand length limitMarine Order 505, Schedule 1
- Sheltered / specified coastal watersoperating areaMarine Order 505, Schedule 1
- 16 yearsminimum AMSA issue ageAMSA eligibility
- RTO + AMPAqualification routeAMSA new-certificate requirements
YOUR NEXT COMMANDWhat this certificate is for
This AMSA domestic certificate combines command and engine operation on small commercial vessels. Its standard machinery limit suits inboards under 100 kW and outboards of any power. The operating area and any endorsements determine the work you can undertake.
AT THE HELMThe vessels and work it covers
Command and operate the engines of a commercial vessel under 12 m in sheltered waters or within 5 nautical miles of shore or an aquaculture lease. The standard inboard limit is under 100 kW, with unlimited outboard power. Tender operation is permitted within 3 nautical miles of a parent vessel inside the EEZ.
Duties you can undertake
- Command and run the engines within the Grade 2 limits
- Carry passengers within the vessel’s authorised operation
- Perform Coxswain Grade 3 duties
Certificate limits
- Under 12 m for command
- Standard inboard power under 100 kW
- Use the applicable sheltered-water, shore, aquaculture or tender operating limit
BEFORE YOU STARTBuild your application checklist
Eligibility and supporting certificates
- Be at least 16 when AMSA issues the certificate and be able to speak, read and understand English
- Meet AMSA’s medical and eyesight requirements using form 1850, or a current AMSA form 303 medical
- Hold current HLTAID011 Provide First Aid or an accepted equivalent
- AMSA restricts holders with colour-deficient vision to duties in daylight hours
Qualification and sea service
- Certificate I in Maritime Operations (Coxswain Grade 2 Near Coastal) through an RTO
- With a completed AMSA-approved task book, at least 10 qualifying days on commercial or recreational vessels
- Without a task book, at least 50 qualifying days on commercial or recreational vessels
Keep evidence of qualifying service using AMSA form 771, the onboard record in your task book, an accepted logbook or a letter from the operator, owner, master or chief engineer. Agree the task-book route with your RTO early.
PAPERWORKApply through AMSA
- Choose the recognised pathway
Find an RTO that offers the qualification and its AMPA. Confirm both are available before enrolling.
- Gather your evidence
Collect your medical, first aid, qualifying certificates, photograph and sea-service record, AMPA cover page and radio evidence where required.
- Lodge the application
Apply in myAMSA using Australian Government myID and upload the documents. If you cannot use myAMSA, take form 426, supporting copies and identity evidence to a participating Australia Post outlet.
AMSA’s new-certificate application fee is AUD 192 in the 2026–27 schedule effective from 1 July 2026. Check the official fee table when lodging.
ASSESSMENTHow competence is assessed
| Part | What to expect |
|---|---|
| Qualification | Complete the Certificate I through an RTO |
| Final assessment | Pass an AMSA Mandated Practical Assessment (AMPA) at an RTO |
| Syllabus | Safety and emergencies, environmental work practices, basic engineering, seamanship, manoeuvring and regulations |
| Practical competence | The syllabus includes berthing, mooring, anchoring, person-overboard manoeuvres, towing, ropework and machinery operation |
YOUR STUDY PLANPrepare one practical decision at a time
- Start with the official programme
Turn the applicable syllabus and competence standards into a revision checklist. Ask your training provider to identify the evidence still needed.
- Practise explaining your choices
Rehearse a departure, a developing collision risk and an emergency. Explain the information you need and the action you would take, then review it with your instructor.
- Connect revision to the boat
Use IALACOLREG to revise collision regulations, buoyage, lights and signals where relevant to your programme. Practise the complete syllabus and required boat handling with your recognised provider.
THE QUALIFICATION PATHHow it fits with other certificates
| Certificate | Relationship |
|---|---|
| Coxswain Grade 3 | Grade 2 includes its duties |
| Coxswain Grade 2 | Standard inboard limit under 100 kW, with the Grade 2 operating areas |
| Coxswain Grade 1 | Separate qualification and service requirements, with inshore operation and a higher inboard limit |
The under-500-kW inboard endorsement requires the specified Grade 1 engineering units and their practical assessment. A ferry-in-chains endorsement requires at least 20 qualifying days on that type of ferry. These are additional endorsements to the Grade 2 certificate.
Does this fit your next role?
A good fit when
- Your planned vessel and operating area fit the certificate
- You can document the experience and complete the recognised qualification
Plan for these requirements
- Medical, first aid and any required radio certificates
- Recognised training and assessment, plus the AMSA application
Start with the intended job, check the certificate limits, and take your existing records to the recognised provider. Build your theory revision alongside the practical pathway.
Theory revision alongside recognised training
Practise supporting knowledge
Practice questions (with answers)
In IALA Region A, the port-hand mark colour is:
Show answer
Correct answer: B. Red, usually can-shaped
Region A: port-hand red, starboard-hand green. Region B: port-hand green, starboard-hand red. Interpret both in the charted conventional direction of buoyage.
A vessel constrained by her draught may display:
Show answer
Correct answer: B. Three red all-round lights vertically
Rule 28: three red all-round lights vertically, in addition to normal power-driven vessel lights.
The day shape for a vessel constrained by draught is:
Show answer
Correct answer: C. A cylinder
Rule 28: the day shape is a cylinder.
A pilot vessel on duty displays at the masthead:
Show answer
Correct answer: B. White over red all-round lights
Rule 29(a): white over red all-round lights at or near the masthead.
A vessel of 12 metres or more aground at night additionally shows:
Show answer
Correct answer: C. Two red all-round lights vertically
Rule 30(d): a vessel aground shows anchor lights plus two all-round red lights in a vertical line.
The topmark of a West Cardinal mark is:
Show answer
Correct answer: C. Two cones point to point
Two separate black cones with their points facing each other. The cones must remain clearly separated.
You are entering a river where the chart shows the conventional direction of buoyage is upstream from the sea entrance. What should determine whether a lateral mark is port-hand or starboard-hand?
Show answer
Correct answer: C. The charted conventional direction of buoyage
Lateral marks are interpreted in the conventional direction of buoyage. The chart, not guesswork, determines which side is port-hand and which is starboard-hand.
You sight a cardinal mark with both cones pointing down and a light showing six quick flashes followed by one long flash. What is the safe action?
Show answer
Correct answer: C. Pass south of the mark
Two cones down and the 6+1 light rhythm identify a South Cardinal mark, meaning the safe water lies to the south of the mark.
The full guide
Coxswain Grade 2 Near Coastal is a practical starting point for small commercial-vessel command. Match the boat, engine and operating area to the certificate, then plan the approved training and sea service together. A completed task book gives you a shorter qualifying-service route.
This title requires the relevant qualification through a registered training organisation and an AMPA. You must complete that approved qualification and assessment route to obtain the title. Arrange training and any recognition of prior learning directly with the RTO. IALACOLREG offers theory and exam preparation only. It provides no certified or approved course. Our material is revision alongside the approved RTO course.
Who can apply
Be at least 16 when AMSA issues the certificate and be able to speak, read and understand English Meet AMSA’s medical and eyesight requirements using form 1850, or a current AMSA form 303 medical Hold current HLTAID011 Provide First Aid or an accepted equivalent
How to obtain the certificate
Complete Certificate I in Maritime Operations (Coxswain Grade 2 Near Coastal) and the AMPA with an RTO, then submit your service and supporting documents to AMSA.
Common questions
- Can I prepare independently?
- This title requires the relevant qualification through a registered training organisation and an AMPA. You must complete that approved qualification and assessment route to obtain the title. Arrange training and any recognition of prior learning directly with the RTO. IALACOLREG offers theory and exam preparation only. It provides no certified or approved course. Our material is revision alongside the approved RTO course.
- What does this certificate allow?
- Command and operate the engines of a commercial vessel under 12 m in sheltered waters or within 5 nautical miles of shore or an aquaculture lease. The standard inboard limit is under 100 kW, with unlimited outboard power. Tender operation is permitted within 3 nautical miles of a parent vessel inside the EEZ.
- Where do I apply?
- Use myAMSA, or lodge form 426 with supporting documents at a participating Australia Post outlet.
Other exams
Reviewed by Ramon Curto, Nautical teacher at IECNPC · Last reviewed:
