Subject 6 of 9

Navigation and chartwork essentials

Navigation questions reward clear method: right scale, right sign, right check. Try each one before you read the answer.

Decide

Four situations at sea. Decide first, then read why.

Key points

  1. Charts and units1 mile = 1,852 m; measure on the latitude scale.
    1. Largest-scale chart, kept corrected from Notices to Mariners.
    2. Depths to chart datum, usually near LAT.
    3. Distance = speed × time.
    Chart basics
  2. CompassVariation + deviation = compass error. Compass to true: add east.
    1. Deviation changes with heading.
    2. Find gyro error by transit or azimuth each watch.
    3. COG is not heading.
    The compass
  3. FixingThree lines at good angles; DR plus current gives EP.
    1. Radar ranges beat radar bearings.
    2. Large cocked hat: find the error.
    3. Cross-check GNSS with another method.
    Position fixing
  4. Depth and UKCDepth = charted + tide; UKC = depth − draught − squat.
    1. Squat grows fast with speed in shallow water.
    2. Tide can fall below datum.
    3. Slow down to gain clearance.
    Tides
  5. Radar and ECDISCPA and TCPA judge risk; the safety contour separates safe from unsafe water.
    1. Relative vectors show collision courses.
    2. Correct heading and speed inputs.
    3. Keep alarms on and keep looking outside.
    ECDIS basics

Check what you have read

Question 1/3

How long is one nautical mile?

Worked case: A coastal fix and a compass check on the 8–12 watch

You are third mate on the 0800–1200 watch, coasting at 12 knots. The ship steers 045° by gyro. You take visual gyro bearings: lighthouse A 320°, church spire B 050°, a charted headland C 095°. The leading lights of a harbour come into line on a charted true bearing of 270°; by gyro they bear 271°.

Before you read the solution: what would you do?

    True or false?

    Decide each statement before you see the answer.

    1. Two bearings crossing at 20° make a good fix.

    2. UKC is the charted depth minus the draught.

    3. GNSS course over ground equals my heading, so it shows compass error.

    4. Variation + deviation = compass error. Compass to true: add east.

    5. ECDIS alarms are distracting, so turn them off in busy waters.

    6. Deviation is the same on every heading.

    7. CPA and TCPA judge risk; the safety contour separates safe from unsafe water.

    8. Measure distance on the longitude scale at the top of the chart.

    9. Three lines at good angles; DR plus current gives EP.

    10. Depth = charted + tide; UKC = depth − draught − squat.

    11. 1 mile = 1,852 m; measure on the latitude scale.

    Exercise: Calculations of the watch

    Distance, compass conversions and under-keel clearance. Work it out, then check.

    Step by step

    1. The ship makes 14 knots for 2 hours 30 minutes. How far does she go?

    2. True course 230°, variation 6° E. What is the magnetic course?

    3. Compass course 100°, deviation 2° E, variation 5° W. What is the true course?

    4. Charted depth 9.0 m, height of tide 2.0 m, draught 9.5 m. What is the static UKC?

    Now on your own

    Now on your own.

    1. A distance of 27 miles at 9 knots. How many hours?

    2. A transit bears 090° true and 088° by gyro. What is the gyro error in degrees (low)?

    3. Which position allows for current and leeway?

    4. On ARPA a target's relative vector points straight at your ship. What does it mean?

    Check: 10 questions

    Questions from this subject, explained after each answer.

    Free: lesson + 10 questions · Exam Pass: all 27 questions, unlimited practice tests, your mistakes retrained

    More on this

    The full explanation and the lessons for each programme item

    Topic 1 of 5

    Charts and units

    One nautical mile is 1,852 metres, about one minute of latitude.

    A knot is one nautical mile per hour. On a Mercator chart, measure distance on the latitude scale at the side, level with where you are measuring: a minute of longitude shrinks towards the poles.

    Use the largest-scale chart available for the area, and keep it corrected. Charts and publications are corrected from Notices to Mariners; urgent changes come by radio navigational warnings and NAVTEX. Record each correction.

    Check a chart's datum and its depth datum before you use it. Charted depths are usually reduced to a low-water level such as Lowest Astronomical Tide (LAT), so there is normally more water than charted, but not always.

    • Speed, distance and time: distance = speed × time. 12 knots for 2.5 hours = 30 miles.
    • Publications a watchkeeper uses: Sailing Directions, List of Lights, tide tables, radio signals lists and the ship's own passage plan.

    Sources

    Checked against the public standards on .